Cement & mortar
Prism and paste conditioning, interim storage before flexural or compressive tests, and method-aligned environmental holding.
Vector VTR-1034 climatic chamber — programmable temperature and relative humidity for sample conditioning, cement mortar storage, stability protocols, and general laboratory environmental testing.
VTR-1034
Climatic Chamber
Programmable temperature & RH · touchscreen HMI · EN 196 / ASTM C511 workflows
Overview
The Vector VTR-1034 Climatic Chamber maintains stable temperature and relative humidity for sample conditioning, mortar and concrete specimen storage, stability studies, and general laboratory environmental protocols — in one insulated cabinet with programmable control.
Unlike dedicated cement curing cabinets tuned only to moisture curing curves, the VTR-1034 is a flexible climatic room for laboratories that need repeatable RH and temperature profiles across building materials, aggregates, soils, coatings, and packaged goods testing.
A touchscreen HMI stores programmes, alarms, and cycle data so operators can match EN 196, ASTM C511-related conditioning practice, internal SOPs, and stability-chamber workflows on the same line as presses, Blaine, and sieving equipment.
At a glance
- VTR-1034 — climatic / conditioning chamber
- Temperature & RH — programmable setpoints
- Touchscreen HMI — profiles, alarms, logging
- Stainless interior — adjustable shelving layout
- EN / ASTM workflows — mortar and specimen conditioning
- CE marked laboratory equipment
Standards & conformity
Browse the standards library
Supports laboratory conditioning referenced to EN 196 mortar and cement specimen handling, ASTM C511 moisture-cabinet practice where climatic storage is required, and internal stability protocols. Supplied as CE-marked equipment with Vector support for programme setup and chamber mapping.
Applications
Controlled atmosphere storage for construction materials laboratories, QC bays, and R&D groups that need repeatable RH and temperature before or after mechanical testing.
Aggregates & concrete
Specimen equilibration, shrinkage-related storage, and controlled exposure prior to strength or durability programmes.
Stability & shelf life
Accelerated or long-term stability on powders, admixtures, and packaged materials under defined climate profiles.
Soils & geotechnics
Moisture conditioning of specimens before classification, compaction, or shear testing workflows.
General laboratory
Reference climate for instruments, reference materials, and multi-discipline sample prep beside curing cabinets and furnaces.
Key features
Stable climate control, visible chamber access, and traceable programmes for busy materials testing laboratories.
Dual-parameter control
Programmable temperature and relative humidity setpoints with circulation for uniform conditions across the working volume.
Touchscreen programmes
Store profiles, limits, and alarms — reduce operator variation between shifts and audit cycles.
Stainless chamber
Corrosion-resistant lining with adjustable shelves for prisms, moulds, trays, and bulk samples.
Insulated door
Low heat and moisture loss on opening — faster recovery to setpoint after loading.
Cycle records
Documented runs support ISO 17025 traceability and internal QC review.
Laboratory equipment
CE-marked unit for commercial testing, plant laboratories, and university research.
Chamber & conditioning
Samples are loaded on adjustable shelves inside an insulated cabinet. The control system drives heating, cooling, and humidification/dehumidification until temperature and RH stabilise at the programmed setpoints — holding specimens until the next test or storage interval.
- Uniform circulation — even conditions across typical mortar prism and tray layouts.
- Flexible shelving — configure height for moulds, prisms, and bulk containers.
- Recovery after access — insulated enclosure limits drift when the door opens for sampling.
Control & monitoring
The touchscreen HMI centralises setpoint entry, programme storage, alarms, and status indication. Operators define conditioning curves aligned with your referenced standard or internal SOP, then rely on consistent automatic regulation between manual checks.
- Programme library — recall typical EN, ASTM, or stability profiles.
- Alarms & limits — early warning on deviation from target climate.
- Vector support — chamber mapping, shelving layout, and method alignment.
Downloads
Product brochure for the Vector VTR-1034 climatic chamber — chamber volume, temperature and humidity range, control features, and typical laboratory conditioning applications.
Brochure (PDF)Vector climatic chamber
Technical overview
Product code
VTR-1034
Function
Programmable temperature and relative humidity conditioning
Control
Touchscreen HMI — profiles, alarms, cycle logging
Chamber
Insulated cabinet with stainless interior and adjustable shelving
Standards alignment
EN 196 specimen conditioning; ASTM C511-related moisture-cabinet practice; internal stability protocols
Typical applications
Cement and mortar, concrete, aggregates, soils, stability and general laboratory storage
Need help choosing?
Our applications team can match equipment to your standards and samples.
Contact our team